The server sends a predefined IPsec proposal from the configured IPsec proposal set to the client, along with the default rekey timeout value. For other proposal sets, PFS will not be set, because it is not configured. Also, for the IPsec proposal set, the group configuration in ipsec policy perfect-forward-secrecy keys overrides the Diffie-Hellman DH group setting in the proposal sets.
Because the client accepts only one proposal for negotiating tunnel establishment with the server, the server internally selects one proposal from the proposal set to send to the client. The selected proposal for each set is listed as follows:. Sec-level basic: esp, no pfs if not configured or group x if configured , des, sha1. Sec-level compatible: esp, no pfs if not configured or group x if configured , 3des, sha1. Sec-level standard: esp, g2 if not configured or group x if configured , aes, sha1.
When users are configured locally, they are configured at the [ edit access profile profile-name client client-name ] hierarchy level and arranged into user groups using the client-group configuration option.
Users configured on an external authentication server do not need to be configured at the [ edit access profile profile-name ] hierarchy level.
For locally-configured users, the user group needs to be specified in the dynamic VPN configuration so that a user can be associated with a client configuration. You specify a user group with the user-groups option at the [ edit security dynamic-vpn clients configuration-name ] hierarchy level.
When a user is authenticated, the user group is included in the authentication reply. This information is extracted and user groups configured at the [ edit security dynamic-vpn clients configuration-name ] hierarchy level are searched to determine which client configuration to retrieve and return to the client for tunnel establishment.
If a user is associated with more than one user group, the first matching user group configuration is used. If a user creates a second connection, then the next matching user group configuration is used. Subsequent user connections use the next matching user group configuration until there are no more matching configurations.
Configure an XAuth profile to authenticate users and assign addresses. Use the profile configuration statement at the [ edit access ] hierarchy level to configure the XAuth profile.
Assign IP addresses from a local address pool if local authentication is used. Use the address-assignment pool configuration statement at the [ edit access ] hierarchy level. A subnet or a range of IP addresses can be specified.
Configure the IKE policy. The mode must be aggressive. Basic, compatible, or standard proposal sets can be used. Only preshared keys are supported for Phase 1 authentication. Use the policy configuration statement at the [ edit security ike ] hierarchy level.
Configure the IKE gateway. You can configure the maximum number of simultaneous connections to the gateway. Use the gateway configuration statement at the [ edit security ike ] hierarchy level. Basic, compatible, or standard proposal sets can be specified with the policy configuration statement at the [ edit security ipsec ] hierarchy level. Use the vpn configuration statement at the [ edit security ipsec ] hierarchy level to configure the IPsec gateway and policy. You enable the configuration check with the set security dynamic-vpn config-check command.
Configure a security policy to allow traffic from the remote clients to the IKE gateway. Use the policy configuration statement at the [ edit security policies from-zone zone to-zone zone ] hierarchy level. Configure the security policy with the match criteria source-address any , destination-address any , and application any and the action permit tunnel ipsec-vpn with the name of the dynamic VPN tunnel. Place this policy at the end of the policy list.
Configure host inbound traffic to allow specific traffic to reach the device from systems that are connected to its interfaces. Optional If the client address pool belongs to a subnet that is directly connected to the device, the device would need to respond to ARP requests to addresses in the pool from other devices in the same zone.
Use the proxy-arp configuration statement at the [ edit security nat ] hierarchy level. Specify the interface that directly connects the subnet to the device and the addresses in the pool. Specify the access profile for use with dynamic VPN. Use the access-profile configuration statement at the [ edit security dynamic-vpn ] hierarchy level.
Configure the clients who can use the dynamic VPN. These options control the routes that are pushed to the client when the tunnel is up, therefore controlling the traffic that is send through the tunnel. Use the clients configuration statement at the [ edit security dynamic-vpn ] hierarchy level.
To log dynamic VPN messages, configure the traceoptions statement at the [ edit security dynamic-vpn ] hierarchy level. A client application can request an IP address on behalf of a client. This request is made at the same time as the client authentication request.
Upon successful authentication of the client, an IP address can be assigned to the client from a predefined address pool or a specific IP address can be assigned.
Address pools are defined with the pool configuration statement at the [ edit access address-assignment ] hierarchy level. An address pool definition contains network information IP address with optional netmask , optional range definitions, and DHCP or XAuth attributes that can be returned to the client. If all addresses in a pool are assigned, a new request for a client address will fail even if the client is successfully authenticated. Access profiles are defined with the profile configuration statement at the [ edit access ] hierarchy.
A defined address pool can be referenced in an access profile configuration. You can also bind a specific IP address to a client in an access profile with the xauth ip-address address option. The IP address must be in the range of addresses specified in the address pool. It must also be different from the IP address specified with the host configuration statement at the [ edit access profile address-assignment pool pool-name family inet ] hierarchy level.
For any application, if one IP address has been assigned, it will not be reassigned again until it is released. If a user needs to have connections from different remote clients, they need to have different group IKE IDs configured, one for each connection. These need to be reviewed and then either fixed or removed. Discuss in Talk:Pulse Connect Secure. Warning: These steps are not recommended. Updating your JRE will break this workaround and you will have to repeat these steps.
Warning: Installing non-packaged versions of Java and symlinking libraries into arbitrary locations is not recommended. None of the clients linked to in Installation depend on these things. Plus, the Gentoo wiki page that this section is based on no longer exists. Furthermore, if Motif is required, does one really have to use lesstif? If you are going to be creating symlinks anyway, why not just use openmotif and then symlink libXm.
Warning: The steps involved in this section, including using obsolete libraries and symlinking new library names to old are absolutely not recommended. Was this ever the case? This section seems to be based on one person's experiences from 10 years ago as of This content needs to be verified. Reason: The information in the note below was added in Is this still an issue in ?
Reason: Please provide a link to the bug report on Red Hat Bugzilla. If that happens, just restart Network Connect. As of , there is no known solution to the problem but there is a bug report on Red Hat Bugzilla.
Category : VPN providers. Hidden categories: Pages with broken package links Pages or sections flagged with Template:Accuracy Pages or sections flagged with Template:Expansion. Navigation menu Personal tools Create account Log in.
Juniper Secure Connect license Licenses are available in 1 year and 3 year subscription models. See these CLI configuration statements related to Juniper Secure Connect at: default-profile , windows-logon , certificate , traceoptions , profile , global-options , client-config , and remote-access.
Related Documentation Overview. Preparing Juniper Secure Connect Configuration. Multi-Platform support. Windows Pre-domain logon. Ensure the Mac feature "Back to my Mac" is disabled as it causes conflicts with the client's operating port.
Once disabled, restart the client. Library research materials, such as journal subscriptions, are unavailable when attempting to access while off campus via SSL VPN. For more information and to enroll in Duo, please visit: Multi-Factor Authentication Check back often as the information may change. What are the minimum hardware requirements? Mac Is macOS Installation Issues How do I upgrade or reinstall the client? Mac macOS stand-alone client installation fails with "Unidentified Developer" error.
Connection Issues I can't connect to VPN - it does not give me a login prompt, login prompt loops, or I have intermittent connection issues. Installation Issues How do I upgrade or install the client? Download the correct client from Pulse Secure download page.
Once the client has finished installing, reboot the machine. After the machine has booted back up, follow the appropriate setup instructions and attempt to connect.
0コメント